The Steyr Scout provides the ideal solution for versatility, durability, accuracy and reliability in a compact and lightweight bolt-action rifle platform. Developed in a nearly decade-long collaboration with legendary Marine Corps Lt.Col. Jeff Cooper, the Scout boasts an extensive list of innovative features.The lightweight bolt-action, all-purpose Steyr Scout rifle was designed to accept a low-powered, forward-mounted scope for accurate fire and both-eyes-open operation to detect flanking dangers. Backup “ghost-ring” iron sights integrated to the top rail can be deployed within seconds should the optics fail. The rifle can also be fitted with a standard scope, should the need arise.

In keeping with Cooper’s requirement for a magazine cutoff, Steyr incorporated a two-position magazine system that allowed the rifle to be fed individually with the five-round magazine in a lowered position. The magazine could be seated one step further with minimal pressure, allowing the bolt to feed cartridges directly from the magazine. A second five-round backup magazine is contained in the buttstock in case of an urgent need to reload.

With a fluted, cold-hammer-forged barrel measuring 19 inches, an overall length of 38.6 inches and an out-of-the-box weight of just 6.6 pounds, the Scout is a breeze to pack out on long adventures, patrolling the farm or taking a quick trip to the range. The compact design of the stock features an innovative integrated bipod that is hardly noticeable until it is folded out from the stock. Between the bipod legs is a UIT rail for attachments, and the stock is outfitted with five press-and-twist sling-swivel attachment points that allow the addition of Cooper’s favored Ching Sling on either side of the rifle.

The Steyr Scout is built on the Safe Bolt System (SBS) action with a unique 2+1 safety function that offers three settings operated by a wheel switch on the tang of the stock. The FIRE mode (safety off) is indicated by a red dot, and the first level of SAFE mode disables the firing mechanism while allowing the bolt to be cycled. The second SAFE position locks the bolt, at which point the bolt can be pushed down against the stock, locking the firing pin and firing mechanism out of firing position, allowing safe transportation with a round in the chamber. Simply pressing the safety’s release tab and rolling it forward returns the bolt to either the SAFE or the FIRE position.

Two 5-round magazines are included. A high-capacity conversion kit and hi-capacity magazines are also available to increase carry capacity to 20 rounds.