|
|
|
|
|
|
|
|
|
|
|
|
|
Enhance your AR15 or 308 AR10 Type extractor reliability by adding one of these Mil-Spec Fluorosilicone O-rings to your bolt assembly. If your rifle, carbine, or pistol AR15 is having reliability problems related to extracting this may be your most affordable fix and at worst will be a benefit regardless.
Similar to Armalite EB0065, but able to withstand higher temperatures.
|
Use this when mounting your A2 or similar flash-hider on barrels threaded with 5/8X24 TPI. It is suitable for Aero Precision's and most other manufacturers' 308 winchester, 300 Blackout, and 6.5 Creedmoor chambered barrels and more.
|
Mil-Spec carbine buffer spring for use in AR15 carbines and pistols with a collapsable butt-stocks or braces. Perfect for your new build or as a direct replacement for worn out parts. Note: Not for use on rifles models with a fixed rifle stock.
Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use this when mounting your A2 or similar flash-hider on barrels threaded with 1/2X28 TPI. It is suitable for Aero Precision's and most other manufacturers 5.56X45 NATO, 223 Remington, 300 Blackout, and similar chambered barrels and more.
|
Mil-spec. receiver extension end plate. For use on AR15 carbines with an adjustable stock.
Made in the USA
|
Use this when mounting your A2 or similar flash-hider on barrels threaded with 5/8X24 TPI. It is suitable for Aero Precision's and most other manufacturers' 308 Winchester, 300 Blackout, and 6.5 Creedmoor chambered barrels and more.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mil-Spec rifle buffer spring for use in A2 and A4 AR15 rifles with a fixed buttstock. Perfect for your new build or as a direct replacement for worn out parts. Note: Not for use on carbine models with a collapsible stock. Made in the USA.
|
Mil-spec receiver extension lock nut (castle nut) for use on AR15 carbines with an adjustable stock. Perfect for your new build or as a direct replacement for worn out parts.
Made in the USA
|
M5 .308 rifle buffer spring for use in .308 AR's with a fixed buttstock. Perfect for your new build or as a direct replacement for worn out parts. Note: Will not work with .308 carbines with a collapsible stock.
Made in the USA.
LIMIT 2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This trigger guard not only gives you a bit more room for your finger, it fills the gap between the receiver, an area that gives some users blisters, and looks better than the original design.
|
This Armalite buffer spring is for a .223 Caliber and has an overall length with a Max of 13-1/2" and a Min of 11-3/4".
|
Custom pivot pins are made to work with the Aero Precision M5 lower. They will work with DPMS- pattern lowers as well, but will stick out further.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Extended Magazine Catch Button is a drop in replacement for the standard lower receiver magazine catch button. This extended button is longer, allowing it to protrude the proper distance when used with our M5 Lower Receiver. Made from Aluminum.
|
Custom takedown pins are made to work with the Aero Precision M5 lower. They will work with DPMS- pattern lowers as well.
|
Classic Mil-spec A2 Flash-hider
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Help protect your hands from the rough edges on your picatinny rails, burns when doing magazine dumps, and frostbite when operating in cold environments and look good doing it with these Magpul Ladder Rail Panels.
Made in U.S.A.
|
Help protect your hands from the rough edges on your picatinny rails, burns when doing magazine dumps, and frostbite when operating in cold environments and look good doing it with these Magpul Ladder Rail Panels.
Made in U.S.A.
|
Help protect your hands from the rough edges on your picatinny rails, burns when doing magazine dumps, and frostbite when operating in cold environments and look good doing it with these Magpul Ladder Rail Panels.
Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Internal core unit for the MIAD as well as the MOE(R) and MOE-K2(R) Grips* designed to hold one (1) standard AR15/M4 complete bolt and firing pin, the perfect place to store critical back-up parts to keep your rifle running under the worst case senario.
Made in U.S.A.
|
Did you launch a detent and spring across the garage during your build and now you can't find it? This Fix-It Kit gets you the most commonly lost parts to finish your build.
All parts in the Fix-It kit are compatible with AR15, M4E1 and M5 builds
|
Internal core unit for the MIAD® as well as the MOE®, MOE-K2®, and MOE® AK Grips* designed to hold two (2) CR123A lithium type batteries in a self contained, water resistant unit. Rubber cap is captured to the unit and can be opened with a push of the thumb. Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The MIAD/MOE Lube Bottle Core is an internal grip core with an included 1/2 oz reusable lubrication bottle to hold the oil of your choice.
Comes standard with the MIAD® GEN 1.1 Grip, the Lube Bottle Core also works with the MOE®, MOE-K2®, and MOE® AK Grips*. *NOTE: Not compatible with the original modular MIAD grip (MAG050) Made in the USA. |
The PMAG Minus 5 Round Limiter installs in 10, 20, or 25 round 7.62x51 LR/SR GEN M3 PMAG bodies, reducing the magazine capacity by five rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.
3 limiters per pack
Made in the U.S.A.
|
Today modern rifles commonly wear weapon lights, thermal imagers, and lasers that work in conjunction with helmet mounted PVS-14s. In order to keep these force multipliers up and running requires a healthy supply of batteries. Enter the internal core unit for the MIAD as well as the MOE, MOE+, MOE-K2, and MOE AK Grips.
Designed to hold two (2) AA type batteries in a self contained, water resistant housing. Included internal spacer provides rattle free storage of either (2) AAA or (2) N size batteries (commonly used for EOTech sights).
The rubber cap has two sides with marking to identify "spent" batteries and can be opened with a push of the thumb.
Made in U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the AR15/M4/M16 magazine that all other magazines are judged against. A combat proven magazine that just keeps on going where other lesser magazines fail. This magazine offers superior feeding, impact resistance, corrosion proof, and more!
Works great with 55.6x45mm Nato, 223, 300 blackout. You should consider having at least 10 for each AR in your inventory.
|
Like the more familiar A2 flash-hider found on the venerable M16/M4 series of rifles, this version is threaded with 5/8X24 TPI and is suitable for Aero Precision's and most other manufacturers' 308 Winchester, 300 Blackout, and 6.5 Creedmoor chambered barrels and more.
|
This is the standard 3oz weight carbine buffer, perfect for you AR15 carbine or pistol.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remington 597 22LR 10-round Rimfire Magazine is a factory fresh back-up or replacement for your original.
Not available in NY
|
- Stainless Steel
- Pistol-length
- Roll-pin included
- For AR15 and 308 ARs
- Made in USA
|
Upgrade your MOE fixed rifle or fixed carbine stock with this plus a quick detach swivel to be able to quickly remove your sling under tactical situations, storage, or for use on another rifle.
See type 2 for UBR,STR
See type 3 for ACS, ACS-L
|
|
|
